Vorshlag bullet nose stud conversion

Hey Guys, I'm going to install Vorshlag bullet nose stud conversion.

Tools

  • brakecleaner spray
  • 5.5mm allen socket
  • torque wrench
  • jack
  • jack stands
  • tire chock

Parts

  • 75mm Vorshlag bullet nose studs

http://www.vorshlag.com/product_info.php?cPath=1_17_161&products_id=389&osCsid=0bc862240dbd3891606cec94b20b0db8

 

 

Make sure the studs are clean, clean them with carb spray.

Red loctite 262 is the best stuff out there,

this is equivalent

place a small drop on the hub end of the stud

the end of stud has a 5.5mm allen head use a allen tool and a torque wrench to tighten the studs to 30lbs

a trick is to put a screwdriver in the vanes of the rotor between the caliper and caliper bracket these keeps the rotor from rotating if you are working alone. If you have a helper you can have your assistant just step on the brakes.

studs installed

I measure my hub and wheels to make sure the studs i ordered werent going to be too long.

75mm Bullet nose no spacers required

alpina wheels et20

caps still fit,

success

kosei k1

15x7

et 25

no spacers or rings required

225/50/15 Kumko Ecsta ast

no rubbing

enough clearance

new track wheels

new studs