BMW E30 M20 POLYURETHANE MOTOR AND TRANSMISSION MOUNT KIT (80A)

---

These 80a polyurethane motor and transmission mounts are meant for that dual purpose track toys that are street driven feel. This kit is a little stiffer then the OEM rubber mounts but not as loud as our delrin units. They are a great trade off between noise and performance.; these will hold the engine and transmission with less movement under braking or cornering. Some NVH will be added. These are a bolt through design (10.9 grade hardware). Hardware has nylon insert so it does not back out on its own. Great for e30's that are spiritedly driven street cars but see the track or auto-x from time to time. The Garagistic design not does not allow for separation of the motor mount or transmission at all. This kit is compatible with all m20 powered e30s: 323, 325e,325i and 325IS.  This kit,  just like every Garagistic bushing, comes with a lifetime warranty. All Garagistic bushings are made right here in the USA!

SIDE NOTE: We highly you recommend reinforce your subframe while doing this upgrade. You can add it in the options list for additional savings.

---

WHAT ARE SOME BENEFITS OF 95A E30 M20 POLY TRANS/MOTOR MOUNTS?

• Adds responsiveness
• Great for track/autox
• Does not all engine movement under heavy breaking or acceleration
• Lifetime warante
• Transmit more power
• Oil resistant
• Compatible with all m20 powered e30s

---

WILL THESE POLY TRANSMISSION/MOTOR MOUNTS FIT MY E30?

This kit is compatible with all m20 powered e30s:

• 323
• 325e
• 325i
• 325IS.

---

READ MORE ABOUT E30 POLY M20 MOTOR/TRANS MOUNTS AT THE GARAGISTIC BLOG

 

We highly recommend reinforcing your subframe with these mounts.

You can add it in the options list for additional savings.

---

MORE INFORMATION ABOUT E30 M20 MOTOR/TRANS BUSHINGS