Accelerator Pedal Bushings Install
1) First uninstall the accelerator pedal by removing the c-clip or pins located at the back of the pedal
2) Remove the throttle cable from the bracket
3) Remove the accelerator pedal pivot bracket clip holding the assembly in place. Once removed, the pedal will be free
4) Remove the old worn out bushing
5) Now assemble the provided press tool by putting the washer on the bolt and one of the bushings with the flat side against this washer
6) Place the cup in position then put the bolt with the washer and bushing through
7) Hold on to one end and use a wrench to turn the other side to press the bushing in
8) Reinstall the accelerator pedal
